Product ID:HP326, MODIFIED EPOXY RESIN ADHESIVE, PART A
MSDS Date:07/11/1986
FSC:8040
NIIN:01-153-9643
Kit Part:Y
MSDS Number: BVXCK

HEXCEL CORP.

11555 DUBLIN BLVD.
DUBLIN, CA 94568
US

Emergency Phone: 415-828-4200

Info Phone: 415-828-4200

Preparer: DONALD L. CROSS

Cage: 04621

HEXCEL CORP.

DUBLIN, CA 94568 US

Telephone: 415-828-4200

Cage: 04621

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <1.6%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: <31%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

ASBESTOS (FRIABLE) (SARA III)

CAS: 1332-21-4

RTECS: CI6425000

Fraction By Weight: <4.9%

OSHA PEL SEE 1910.1001

ACGIH TLV: 0.2 FIBERS/CC 94

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:PROLONGED/REPEATED CONTACT MAY CAUSE
SKIN IRRITATION. VAPORS RELEASED DURING PRODUCT CURE MAY CAUSE
IRRITATION TO EYES & RESPIRATOY SYSTEM. DUST FROM MACHINING CURED
PRODUCT MAY CAUSE EYE IRRITATION. DIRECT CONTACT WITH THE EYES
COULD CAUSE EYE IRRITATION. CHRONIC INHALATION OF DUST MAY CAUSE
LUNG DISEASE OR CANCER.
Explanation of Carcinogenicity:CONTAINS A [1332-21-4] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN BY MFR ON
MSDS.

First Aid:IN EVENT OF SKIN PROBLEMS, THOROUGHLY WASH THE AFFECTED AREAS
WITH SOAP & WATER. IF EYES ARE AFFECTED, FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND OBTAIN MEDICAL ASSISTANCE IF THE IRRITATION
PERSISTS . PROVIDE OXYGEN AND OBTAIN MEDICAL ASSISTANCE IF THERE
ARE ANY ADVERSE EFFECTS FROM THE INHALATION OF CURING VAPORS OR OF
VAPORS FROM AN EXOTHERM.

Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE SORN IN ALL FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:NONE ANTICIPATED.

Spill Release Procedures:"N/A" NO INFORMATION GIVEN BY MFR ON MSDS.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS.

Handling and Storage Precautions:MAINTAIN SEALED AGAINST CONTAMINATION
FROM DIRT & MOISTURE. STORE BELOW 32F.
Other Precautions:GOOD PERSONAL HYGIENE PRACTICES SHOULD BE FOLLOWED AT
ALL TIMES.

Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR
RECOMMENDED WHEN HEATED TO 120F OR ABOVE. NIOSH APPROVED DUST MASK
WORN WHEN MACHINING CURED PRODUCT.
Ventilation:LOCAL EXHAUST SUFFICIENT TO CONTROL VAPORS OR DUST
GENERATED. MECHANICAL (GENERAL) - LOCAL PREFERRED.
Protective Gloves:IMPERVIOUS GLOVES FOR HANDLING PRODUCT
Eye Protection:SAFETY GLASSES OR GOGGLES AT ALL TIMES
Other Protective Equipment:EYE WASH FOUNTAINS AND BARRIER CREAMS. WEAR
EYE PROTECTION AND GLOVES AT ALL TIMES WHEN HANDLING PRODUCT.
Work Hygienic Practices:GOOD PERSONAL HYGIENE PRACTICES SHOULD BE
FOLLOWED AT ALL TIMES.
Supplemental Safety and Health
MSDS ENTERED INTO THE HMIS BY DGSC AT REQUEST OF GSA.

HCC:V7
NRC/State Lic Num:NONE
Spec Gravity:1.3-1.6
Appearance and Odor:THIXOTROPIC OFF-WHITE PASTE
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, OXIDIZING AGENTS
Stability Condition to Avoid:AVOID PROLONGED EXPOSRE TO HEAT
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, AVOID
INHALATION.
Conditions to Avoid Polymerization:AVOID PROLONGED EXPOSURE TO
TEMPERATURES ABOVE 100F.

Waste Disposal Methods:CONSULT A CERTIFIED WASTE DISPOSAL CONTRACTOR
FOR DISPOSAL I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.